Closed Column BHO Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens)
This system allows the user to build up solvent pressure by closing the valve, pulling a vacuum and
filling the extractor, Extractor will fill about 85% with solvent before the internal pressure will equal the
pressure of the can propellant.
The solvent can will fit into either port with a tip adapter supplied with some butane cans, tip adapter
required, not included
Solvent Soak is expected to be between 30-90 min, but this all depends on material, starting with frozen
cans of solvent is recommended
This system allows the user to soak the material before opening the bottom valve to release the solvent
and oil.
Description:
Traditional Extractor. All parts made from 304 Stainless Steel.
Complete safety at low temperature and high pressure.
The solvent can will fit into the top cap hole
Vacuum clamps at all interfaces make for easy clean. High Polish Interior.
Gaskets are designed for Oil Processing. Temp range (-20…+200)oC.
Type of tube 2” x 20” (51mm x 500mm). Volume 900ml.
Tubes Hold either 180g of dry material (Approximately)
Includes:
1 x 2” Tri-Clamp Jacket Spool for dry Ice 2" Inner 20” (500mm) ,3"Outer 18" (450mm) long made of
Stainless Steel 304
1 x 2” Quadpod
2 x 2” Tri-Clamp fitting FNPT 1/4"
1 x 2” Single Pin Clamp
1 x 2” Tri-Clamp Viton Screen gasket 150 mesh stainless steel 304
1 x 2” Tri-Clamp Viton gasket
2 x Ball Valve 1/4" , Full Port FNPT, SS304.
1 x Adapter JIC - NPT stainless steel 304 . Size 1/4"
1 x Pressure gauge -1 10bar SS 304
1 x ¼" Adapter pagoda
1 x T- type 1/4" FNPT fitting