Closed loop system Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens)
This system allows the user to build up solvent pressure by closing the valve, pulling a vacuum and
filling the extractor, Extractor will fill about 85% with solvent before the internal pressure will equal the
pressure of the can propellant.
The solvent can will fit into either port with a tip adapter supplied with some butane cans, tip adapter
required, not included.
requires vacuum pump not included.
Description:
Traditional Extractor. All parts made from 304 Stainless Steel.
Complete safety at low temperature and high pressure.
The solvent can will fit into the top cap hole
Vacuum clamps at all interfaces make for easy clean. High Polish Interior.
Gaskets are designed for Oil Processing. Temp range (-20…+200)oC.
Type of tube 1.5” x 6” (38mm x 150mm). Volume 187ml.
Tubes Hold either 45g (1.5 oz) of dry material (Approximately)
Includes:
1 x 1.5” Tri-Clamp Pipe 6” (150mm) long made of Stainless Steel 304.
2 x 4” (102mm) x 4" (102mm) Pipe with bottom
2 x 1.5” Tri-Clamp fitting FNPT 1/4"
2 x 4” Single Pin Clamp
2 x 1,5" Single Pin Clamp
1 x 1.5” Tri-Clamp Viton Screen gasket 150 mesh stainless steel
1 x 1.5” Tri-Clamp Viton gasket
2 x 4” Tri-Clamp Viton gasket
3 x Adapter JIC - NPT stainless steel 304 . Size 1/4"
3 x Ball Valve 1/4" , SS304.
1 x 4" lid 1x 1/4" FNPT
1 x 4 " lid 1x1/4"FNPT 1x1,5"
1 x 3 way fitting 1/4" FNPT
1 x 39" (1m) braided hose